SQUEEZEVID

SqueezeVid compared with HandBrake, FFmpeg and FreeConvert

There is no single right answer to “how do I make this video smaller”, and a page that pretended otherwise would be worth nothing to you. These three are the tools most people are sent to, all three are good, and two of the three are free software. What follows is where each one differs from this tool, where it is plainly the better choice, and the one narrow job this tool is built to do better than any of them.

Every factual claim below is read off the product’s own documentation and carries a link to the page it came from, with the date it was read. Nothing here is quoted from a review or from memory, and nothing is a number this tool’s author made up about somebody else’s software.

The four differences that matter

Third-party facts verified on 2026-11-08 against each product’s own documentation, linked in full below. This tool’s own column is held by its test suite rather than by a source link.
 SqueezeVidHandBrakeFFmpegFreeConvert
Runs onYour browserDesktop app (macOS, Windows, Linux)The command lineBrowser plus their servers
PriceFree, no accountFree, GPL v2Free, LGPL v2.1 / GPL v2Free under 1GB, then paid
Your fileNever uploadedStays on your computerStays on your computerUploaded, kept up to 8 hours
Exact size targetYes, in MB, then verifiedNo — quality or bitrateNo — you compute the bitrateYes, as a percentage

Should you use HandBrake instead?

The open-source video transcoder most people are pointed at first, and deservedly.

What HandBrake does better

  • Batch scanning and queueing, so a folder of files can be left to encode
  • Encoding to AV1, H.265, VP8, VP9, MPEG-4 and MPEG-2 as well as H.264
  • Fine control over the encoder, filters and audio tracks
  • Working on any machine that can run a desktop app, with no browser requirement

Use HandBrake, not this, when…

You have several files to get through, you want an archival-quality AV1 or H.265 encode, or you want to set the encoder up yourself. It is free, it is excellent, and for those jobs it is simply the right answer.

And stay here when…

You have one clip and a hard limit to clear — a Discord attachment, an email, an upload form that rejects anything bigger. HandBrake will ask you for a quality level and tell you the size afterwards; this asks you for the size.

The facts, and where they were read

Runs on
A desktop app you install, for macOS 10.13 and later, Windows 10 and later, and Linux. Source, read 2026-11-08.
Price
Free; most of its source code is under the GNU General Public License, version 2. Source, read 2026-11-08.
Your file
Never leaves your computer — it is an installed application, not a service. Source, read 2026-11-08.
Exact size target
No; it offers Constant Quality or Average Bitrate encoding, so the final size is an outcome rather than an input. Source, read 2026-11-08.

HandBrake’s own site

Should you use FFmpeg instead?

The command-line toolkit underneath most video software, including a good deal of the web.

What FFmpeg does better

  • Scripting and automation, which is the reason it exists
  • Every container, codec and filter there is, including the ones no browser implements
  • Being the thing you reach for when the job is not quite like any other job

Use FFmpeg, not this, when…

You are comfortable at a prompt and the work repeats. Anything you can describe, FFmpeg can do, and it can do it to a thousand files while you are asleep.

And stay here when…

You want the file under a limit now and would rather not do the arithmetic. Working the bitrate out from a target and a duration, reserving room for the audio track and the container, then checking the result and going again if it overshot, is the entire job this tool does for you.

The facts, and where they were read

Runs on
The command line, on effectively any operating system. Source, read 2026-11-08.
Price
Free; licensed under the GNU Lesser General Public License version 2.1 or later, and under the GPL version 2 or later when its optional GPL parts are built in. Source, read 2026-11-08.
Your file
Never leaves your computer. Source, read 2026-11-08.
Exact size target
Not as an encoding mode. Its `-fs` option documents a hard stop — “No further chunk of bytes is written after the limit is exceeded” — which truncates the video rather than fitting it, so hitting a size means working out the bitrate yourself. Source, read 2026-11-08.

FFmpeg’s own site

Should you use FreeConvert instead?

One of the upload-based online compressors — the shape nearly every free web video tool takes, and the one this site was built as an alternative to.

What FreeConvert does better

  • Running anywhere a browser runs, including phones and machines whose browser has no WebCodecs support, because the encoding is not happening on your device
  • Carrying on without you once the upload finishes
  • Converting between a long list of formats, video being only one of them

Use FreeConvert, not this, when…

Your device or browser cannot do the work — an older phone, a locked-down machine, anything without WebCodecs — or the file needs a format this tool does not write. Doing the encoding somewhere else is the whole point of that design, and it is a real advantage when your own hardware is the problem.

And stay here when…

The file is large, or it is private. A home connection uploads far more slowly than it downloads, so a multi-gigabyte phone video can spend a long time going up before any work starts — and screen recordings carry whatever was on the screen at the time. Here the file is never uploaded, so neither the wait nor the question arises.

The facts, and where they were read

Runs on
Your browser, plus their servers, which do the encoding. Source, read 2026-11-08.
Price
Free up to a point — the compressor states “Max file size 1GB. Upgrade for more”. Source, read 2026-11-08.
Your file
Uploaded. Their privacy policy says files “are stored with Amazon Web Services (“AWS”) in Ireland” and are “automatically and permanently deleted after 8 hours”. Source, read 2026-11-08.
Exact size target
Yes, as a proportion rather than a number of megabytes: it offers “Target a file size (Percentage)” of the original. Source, read 2026-11-08.

FreeConvert’s own site

How this page is kept honest

Comparison pages go wrong in a predictable way: a rival’s free tier changes, or a licence does, and the page keeps saying what used to be true — usually in the author’s favour, because nobody re-reads the parts that flatter them. The facts above are therefore stored as individual claims, each with the page it was read from and the date, and the project’s test suite fails once any one of them goes unverified for a quarter. That does not make them true; it makes them auditable, and it puts a deadline on the next read.

If something here is out of date or simply wrong, saying so is welcome and it will be corrected rather than argued with. The about page has the address.

Pages read, all on the products’ own sites: ffmpeg.org/ · ffmpeg.org/ffmpeg.html · ffmpeg.org/legal.html · handbrake.fr/downloads.php · handbrake.fr/features.php · www.freeconvert.com/privacy · www.freeconvert.com/video-compressor

Questions people actually ask

Is there a free alternative to HandBrake that works in a browser?
This is one, for the specific job of getting a file under a size limit. It needs no installation and no account, and it runs on your own machine’s video encoder rather than on a server. For batch work, for AV1 or H.265, or for detailed control over the encoder, HandBrake remains the better tool and it is also free.
Do online video compressors upload my file to a server?
Nearly all of them do: you upload, their servers encode, you download the result. That is why they work on any device, and it is also why the file leaves yours. This tool is the other design — the encoding happens in your browser tab through WebCodecs, and there is no upload endpoint on the site to send it to.
Can FFmpeg compress a video to an exact file size?
Not as a setting. Its file-size option stops writing once the limit is reached, which truncates the video rather than fitting it, so hitting a target means calculating the bitrate from the duration yourself and usually encoding more than once. That calculation is what this tool does for you, and it checks the result afterwards.
Which should I use to get a clip under Discord’s limit?
This one, if the clip is already shot and you just need it to fit: you type the limit and it works backwards to meet it. Use HandBrake instead if you have a folder of clips to get through, and an editor if the clip needs cutting rather than shrinking.
Why would I not use this tool?
Three honest reasons. Your browser has no WebCodecs support, in which case a server-side tool is the one that will work. You need editing, batch processing, or a format other than MP4. Or the clip is long and the limit is tight, where the arithmetic leaves too few bits for watchable video and no encoder can fix it.

Back to the compressor